Skip to product information
1 of 7

❄️BLACK FRIDAY 50% OFF!🏡4-in-1 Gas & Carbon Monoxide Monitor – Clear Readings at a Glance

❄️BLACK FRIDAY 50% OFF!🏡4-in-1 Gas & Carbon Monoxide Monitor – Clear Readings at a Glance

Regular price £25.99
Regular price £51.99 Sale price £25.99
50% OFF Sold out
Shipping calculated at checkout.
Colour: Black
Ordered
Order Ready
Delivered
Whole Shop! Buy more, Save more!
Minimum Qty Discount
Product description

DON'T WAIT UNTIL DANGEROUS GAS BECOMES IMPOSSIBLE TO IGNORE.

Carbon monoxide is invisible. You cannot smell it, see it or reliably detect it without the right equipment.

Gas leaks can be just as easy to miss until the situation has already become serious.

This plug-in 4-in-1 detector continuously monitors the air around you, detecting carbon monoxide as well as combustible gases including natural gas and propane — while displaying actual readings directly on the screen.

Instead of simply showing a green light and waiting for a high-level alarm, you can see what is happening in the room in real time.

Simply plug it into a suitable wall outlet, allow the sensor to initialise and let it monitor continuously.

CO + NATURAL GAS + PROPANE | REAL-TIME DISPLAY | EARLY CO WARNING FROM 30 PPM | TEMPERATURE & HUMIDITY MONITORING


FEATURES

DETECTS CARBON MONOXIDE, NATURAL GAS & PROPANE

One compact device monitors several of the most important combustion-related hazards found around homes, heating systems, kitchens and recreational vehicles.

It is designed to detect:

  • Carbon monoxide (CO).

  • Natural gas.

  • Propane.

That makes it particularly useful around gas boilers, heaters, water heaters, cookers, fireplaces and other fuel-burning appliances.

Instead of using a basic CO-only alarm, you can monitor both carbon monoxide and combustible gas leakage from one device.

EARLY CO WARNING STARTING FROM 30 PPM

The original system is designed to provide an early warning when carbon monoxide readings reach approximately 30 PPM.

This gives you visibility into rising CO levels instead of relying only on a later high-level alarm.

  • CO displayed in PPM.

  • Early warning from approximately 30 PPM.

  • Continuous monitoring while connected to power.

  • Lets you see increasing readings before conditions become more serious.

  • Provides actual numerical information rather than only an alarm/no-alarm indication.

REAL-TIME DIGITAL DISPLAY — SEE WHAT'S ACTUALLY IN THE AIR

You don't have to guess whether the detector is actively monitoring.

The integrated display provides real-time environmental readings directly on the unit.

The screen displays:

CO — PPM

Shows the measured concentration of carbon monoxide.

GAS — %LEL

Displays combustible gas detection as a percentage of the Lower Explosive Limit.

TEMPERATURE

Displays the current room temperature.

HUMIDITY — %RH

Shows the current relative humidity level.

Actual readings give you more information than a simple status light alone.

4-IN-1 ENVIRONMENTAL MONITORING

This device combines multiple monitoring functions into one compact unit:

1 — CARBON MONOXIDE

Continuous CO concentration monitoring.

2 — COMBUSTIBLE GAS

Detection of natural gas and propane through the gas monitoring channel.

3 — TEMPERATURE

Real-time room temperature display.

4 — HUMIDITY

Real-time relative humidity monitoring.

One screen gives you a clearer overview of both gas conditions and the surrounding indoor environment.

PLUG IN & START MONITORING — NO BATTERIES OR APP

No drilling.

No wall brackets.

No Wi-Fi configuration.

No smartphone pairing.

No batteries to replace.

Simply connect the detector to a compatible wall outlet and allow approximately 200 seconds for the sensor to initialise and calibrate.

Once ready, it continuously monitors the surrounding air while connected to mains power.

PLUG IN. CALIBRATE. MONITOR.

CONTINUOUS MONITORING FOR THE PLACES THAT MATTER MOST

Gas-related risks are not limited to one room.

The detector can be positioned in suitable locations around:

  • Bedrooms.

  • Kitchens.

  • Boiler rooms.

  • Areas near gas water heaters.

  • Living rooms.

  • Basements with heating equipment.

  • Workshops.

  • Campervans and caravans with compatible mains power.

  • Other areas using fuel-burning appliances.

For larger properties, multiple units can be used to monitor several important areas independently.

DESIGNED FOR EARLIER VISIBILITY — NOT JUST A LAST-MOMENT ALARM

Many basic alarms tell you little until the alarm threshold is reached.

This detector takes a different approach by continuously displaying actual measurements.

You can see:

  • Whether CO is present.

  • Whether combustible gas is being detected.

  • Whether levels are increasing.

  • The current temperature.

  • The current humidity.

That means you are not relying solely on a single warning light to understand what is happening around you.

THIRD-GENERATION SENSOR TECHNOLOGY

The original product is described as using a third-generation sensor system, designed for faster, more precise and longer-lasting monitoring than the basic first-generation sensors used in some conventional detectors.

Combined with continuous mains power and a real-time display, the sensor system is designed for ongoing everyday monitoring rather than occasional manual checks.


WHERE TO USE IT

HOME

Monitor areas where boilers, fireplaces, gas cookers, heaters or other fuel-burning equipment are used.

BEDROOM AREAS

Place suitable detectors near sleeping areas to provide continuous monitoring when occupants may be less likely to notice early symptoms of gas exposure.

KITCHEN

Monitor environments where natural gas or propane appliances are used.

BOILER & HEATING AREAS

Position a detector near suitable heating equipment to monitor for CO and combustible gas.

CAMPERVAN & CARAVAN

Useful wherever propane, gas heating or cooking equipment is used and a compatible mains outlet is available.

WORKSHOP & GARAGE

Suitable for spaces where combustion equipment or gas appliances may be operated, subject to the device's operating requirements.


INSTALLATION

STEP 1 — CHOOSE THE CORRECT LOCATION

Select a compatible wall outlet in the area you want to monitor.

For carbon monoxide monitoring, CO mixes with surrounding room air.

For natural gas monitoring, positioning higher in the room can be advantageous because natural gas is lighter than air.

Installation should always follow the supplied product manual and applicable local safety requirements.

STEP 2 — PLUG THE DETECTOR INTO THE OUTLET

Insert the device directly into a compatible mains socket.

No drilling, mounting screws or Wi-Fi connection are required.

STEP 3 — ALLOW APPROXIMATELY 200 SECONDS FOR CALIBRATION

After power-up, allow the sensor approximately 200 seconds to initialise and calibrate.

STEP 4 — CHECK THE DISPLAY

Once operational, the screen provides real-time readings including CO concentration, combustible gas level, temperature and humidity.

Keep the device continuously connected for ongoing monitoring.


SPECIFICATIONS

Specification Details
Product Type 4-in-1 Gas & Environmental Detector
CO Detection Yes
Natural Gas Detection Yes
Propane Detection Yes
Combustible Gas Display %LEL
CO Display PPM
CO Early Warning From Approx. 30 PPM
Temperature Monitoring Yes
Humidity Monitoring Yes
Humidity Display %RH
Display Integrated Digital LCD
Monitoring Real-Time / Continuous
Sensor Third-Generation Sensor Technology
Power Supply Direct Mains Plug-In
Battery Replacement Not Required
Wi-Fi Not Required
Smartphone App Not Required
Initial Calibration Approx. 200 Seconds
Installation Plug Directly Into Compatible Wall Outlet
Intended Locations Home, Kitchen, Bedroom Area, Heating Area, Camper & Workshop
Claimed Standard EN 50291*

 


IMPORTANT SAFETY INFORMATION

  • Carbon monoxide and combustible gas exposure can be life-threatening. Never ignore an alarm, rising reading or suspected gas leak.

  • If a CO or combustible-gas alarm activates, or you suspect a leak, move people and animals to fresh air as appropriate, avoid actions that could create a spark, and contact the relevant emergency or gas-safety service.

  • Do not use smell as a substitute for gas detection. Carbon monoxide is colourless and odourless.

  • This detector does not detect smoke and should not be used as a replacement for required smoke alarms.

  • The product should not replace any legally required certified CO, smoke or combustible-gas alarms unless the specific unit is approved for that purpose under the regulations applicable in your country.

  • Always verify the actual certification of the supplied model before marketing or installing it as a life-safety alarm.

  • Keep the detector continuously connected to power when protection is required.

  • Do not cover the detector or obstruct its ventilation/sensor openings.

  • Do not install it where curtains, furniture or other objects prevent normal airflow around the device.

  • Keep away from excessive moisture, water, grease, dust and environmental conditions outside the manufacturer's specified operating limits.

  • Installation height can differ according to the gas being monitored. Follow the supplied manufacturer's instructions and local fire/gas-safety guidance.

  • Natural gas is generally lighter than air, while propane is heavier than air; one installation position may not provide optimal detection for every gas. Follow the device's certified installation instructions.

  • Test and maintain the detector according to the supplied manual.

  • Replace the device when it reaches the manufacturer's stated sensor/end-of-life limit.

  • If anyone develops headache, dizziness, nausea, confusion, unusual fatigue or other symptoms potentially associated with carbon monoxide exposure, move to fresh air and seek emergency medical assistance.

  • Never re-enter a potentially contaminated area until qualified professionals confirm it is safe.

View full details
❄️BLACK FRIDAY 50% OFF!🏡4-in-1 Gas & Carbon Monoxide Monitor – Clear Readings at a Glance
£25.99